Composite panel coating system, aluminum joinery is a product produced by the so-called systems. Thanks to this system, which is used in the exterior cladding of the spaces, because the plates can be shaped as desired, it enables the emergence of a wide variety of structures in different views and visually keeping the customer satisfaction at the highest level. You can get comprehensive information and pricing about composite coating Ankara services and variety from head offices.
This so-called composite siding is essentially filled between two aluminum sheets with a special material. This substance is called polyethylene. The coating of the exterior of the structure with these two plates is called composite coating.
Properties of Composite Coating
As technology advances, both aesthetic and reliable structures can be produced not only in the interior architecture but also on the exterior surfaces of the building without the need for heavy concrete or brick floors. Significant progress has been made in aluminum joinery techniques as well as in coating variations.
General properties of composite coatings can be summarized as follows;
Aesthetic look,Stiffness,Weight,Heat resistance and thermal insulation conductivity,Electrical resistance and electrical conductivity,Resistance to abrasion,Acoustics (sound retention and sound absorption),Resistant to high temperatures and temperature changes,Resistance to pressure, tensile, impact and bending,Fracture toughness.
These properties can be described as the general characteristics of composite sheets. However, there are many other special benefits. Therefore, in recent years, architecture is one of the most preferred exterior surface coatings.
Composite Coating Materials
Different materials need to be brought together to form this system. These combinations may vary according to customer demands and suitability of the building structure. Composite coating Some of the coating materials used in Ankara services are as follows; epoxy resin, silicon, metal, fiber, steel, polyester resin, glass fibers, carbon fibers, boron fibers, silicon carbide fibers, asbestos fibers, phenolic resins. Apart from these materials, many detail materials are used. As mentioned before, the architects and the experts of composite coating Ankara decide which building and which materials should be used.